SWD Electrical dust collector for chemical industry

SWD Electrical dust collector 1.Can deal with granular size under 1 micron 2.Overhaul period is10 years 3.Efficiency>98%

SWD Electrical Dust Collector For Chemical Industry

Applied Range:

It is widely used in coal-fired power stations, black and non-ferrous metal smelting, cement, chemical, paper and other industries.  It is one of ideal equipments that preventing air pollution.

Advantages:

Excellent adaptability; Versatility; Good processing capacity; Excellent reliability; High efficiency;

Small running resistance; Low operating cost and maintenance.

1. Our electrical dust collector can collect the dust who’s size under A micron. This level is the Mechanical filter can not achieved.

2. Our electrical dust collector can deal with the flue gas who’s temperature is 400 degree even higher than 400 degree. Mechanical filter can not achieved this level either.

3. Our electrical dust collector can deal with millions of cubic meters dust per hour, and its dedusting efficiency can be higher than 98%.

4. And its overhaul period is 10 years. So it can help you save a lot of money and time.

Detailed  parameters:

Type           Item	SWD  50×3	SWD  60×3	SWD  70×3	SWD  80×3	SWD  90×3
effective cross sectional area (m2)	50.2	60.1	75.2	80.1	90.2
air volume×104(m3/h)	18-21.8	21.5-26	25-30.2	28-35.2	32-38.9
electric field wind speed(m/s)	1-1.2
under pressure (pa)	-6000-0
flue-gas temperature (°C)	≤300
design efficiency (%)	≥99
loss of pressure (%)	≤294
air leakage ratio(%)	<3
electric field number/numbers of room	3electric field /single room
Electric field length (m)	4.0×3=12
high pressure power supply number	3sets
High tension current (A)	0.2	0.2-0.3	0.3-0.4	0.4-0.5	0.4-0.5
voltage value (KV)	72
Contour size of the equipment length×Width×Height (m)	22.9×8.88×17.15	22.9×9.38×18.45	23.9×10.58×17.25	23.9×10.93×18.45	23.9×11.63×18.8

SWD Electrical dust collector for chemical industry